The Nightstick MT-100 series non-rechargeable metal flashlights each use a CREE® LED in combination with a deep parabolic reflector creating a tight, long throw beam for distance illumination.
With a water resistant design, each light is constructed from aircraft-grade 6061-T6 aluminum with a Type 2 hard anodized finish. The tail switch on each light provides momentary or constant-on functionality. The MT-100, 110 and 120 each come with a removable pocket clip, while the MT-130, with its goose-neck design, comes with a removable clip-on magnet...perfect for a multitude of hands-free uses. The MT-110, 120 and 130 also include a removable wrist lanyard.
The MT-100 is powered by two AAA batteries. The MT-110 uses a single AA battery
The MT-120 and MT-130 use two AA batteries. In all cases, the batteries are included.
These non-rechargeable polymer lights are now cETLus, ATEX, IECEx and MSHA listed Intrinsically Safe Permissible for use in both above and below ground hazardous locations where explosive gases and dusts may be present.
With a waterproof design, each of these lights have a powerful light output thanks to their CREE® LEDs. The XPP-5420B&G are both flashlights and are rated at 140 Lumens. The XPP-5422B&G are Dual-Lights giving the user the ability to select one of three lighting modes: Flashlight -- For distance illumination, Floodlight -- For close-up illumination, and Dual-Light -- With both the Flashlight & Floodlight running at the same time for maximum user safety while walking in industrial situations where trip hazards might exist. The Flashlight lights the way ahead, while the Floodlight light the ground at the user's feet. Both the Flashlight & the Floodlight on the 5422s are rated at 120 Lumens each and the Dual-Light generates a total of 240 Lumens.
The NSP-2422 Series multi-purpose non-rechargeable Dual-Lights use a CREE® LED rated at 130 lumens paired with a high-efficiency deep parabolic reflector, creating a flashlight beam with an effective range of 181 meters (over 590 feet). Additionally, built into the handle is a 110 lumen floodlight. Unlike the flashlight beam, the light coming out of the floodlight does not have a reflector so the light spreads out in a wide, even, unfocused pattern of light...perfect for lighting up things that are close. Both the flashlight and the floodlight can be turned on at the same time for even more versatile lighting options. The waterproof design, in combination with an impact and chemical resistant engineered polymer housing, make these tough little lights, one of the best values around. Use the integrated magnet located in the base of the handle to provide almost limitless hands-free usage.
Feniex Industries is proud to release the Cannon, an American engineered and made hide-a-way. With a powerful ring of 12, 4-watt LEDs, the Feniex cannon provides intense warning lighting. The system is available with dual color functionality and an inline driver.
The Nightstick TAC-300 Series is a set of non-rechargeable polymer or metal LED tactical flashlights that outperforms most other lights that cost twice as much. Four models are included in the series...the TAC-300 (B, T & Y) and the TAC-350B. With a CREE® LED rated at 180 lumens, combined with a high-efficiency deep parabolic reflector, the TAC-300 Series' beam has an effective range of 190 meters (over 620 feet). A waterproof design in combination with an impact and chemical resistant glass-filled nylon polymer housing (300s) or an aircraft-grade 6061-T6 aluminum housing (350), make the TAC-300 Series one of the toughest set of tactical lights around. The large tail-cap switch provides momentary or constant-on light operations. Running on a pair of included CR-123 Lithium batteries, the TAC-300 Series lights are rated at 3 hours of run-time.