John Farnam's tip on rail-covers

Submitted by:
PoliceOne Senior Editor Doug Wyllie


06/24/2010

John Farnam, 2010 ILEETA Trainer of the Year, continues to share excellent tips and updates via Dtiquips. If you have not yet done so, you may want to consider signing up for his daily email distribution over on Defense Training International. Below is an excellent example: John’s thoughts on rail covers. Here’s the full text of that tip.  Thanks John, for letting us share it with P1 Members.

The most common accessory-mounting system for serious rifles is currently the “Picatinny Rail,” which has, by now, all but superceded the similar “Weaver Rail.”

After the 2004 SHOT Show, I “railed against rails,” seeing so many rifles with maladroit accessories heaped upon them to the point that it was difficult to actually see the rifle itself under all that junk!

In the interim, I’ve been compelled to admit I was wrong. Like anything else, rails can be misused, as noted above, but, for modern, serious rifles, they have turned out to be a great boon to mankind!

Top, side, and bottom Picatinny forend-rails provide a genuinely secure platform for mounting optics, weaponlights, and lasers, the three most applicative accessories for serious rifles. Heretofore, many accessories were glued, screwed, and pinned to guns. None of these attachment methods were sufficiently durable for serious weapons. Conversely, Picatinny rails are not only durable, but they are also positively “repeatable,” so that optics can go on, be subsequently sighted in, then come off and go back on, all with no necessity for re-zeroing.

However, one pesky downside lingers on:

Forend rails on the side and bottom will scuff hands, particularly in cold weather. They also snag on fabric.

One solution has been rubber “rail-covers,” but, until recently, they have been excessively bulky and difficult to adjust with regard to length.

Now, Surefire is marketing its skeletonized “Z70" rail covers. They look like a rubber ladder, and fit onto Picatinny rails, filling in the slots, but adding no bulk! They come in five-and-a-half-inch lengths, but can be easily cut to fit any unoccupied portion of rail.

However, heat is still an issue, although railed forends are typically shielded. So, for maximum cooling, it is best to leave as much rail exposed and uncovered as possible.

The result is a good, non-snag gripping surface that doesn’t scuff hands.

I have them on all my railed rifles.

Recommended!

/John


Doug Wyllie is Editor in Chief of PoliceOne, responsible for setting the editorial direction of the website and managing the planned editorial features by our roster of expert writers. An award-winning columnist — he is the 2014 Western Publishing Association "Maggie Award" winner in the category of Best Regularly Featured Digital Edition Column — Doug has authored more than 750 feature articles and tactical tips on a wide range of topics and trends that affect the law enforcement community.

On a daily basis, Doug is in close personal contact with some of the top subject-matter experts in law enforcement, regularly tapping into the world-class knowledge of officers and trainers from around the United States, and working to help spread that information and insight to the hundreds of thousands of officers who visit PoliceOne every month.

Doug is a member of International Law Enforcement Educators and Trainers Association (ILEETA), an Associate Member of the California Peace Officers' Association (CPOA), and a member of the Public Safety Writers Association (PSWA).

Even in his "spare" time, he is active in his support for the law enforcement community, contributing his time and talents toward police-related charitable events as well as participating in force-on-force training, search-and-rescue training, and other scenario-based training designed to prepare cops for the fight they face every day on the street.

Contact Doug Wyllie



Back to previous page